BCS closes for Christmas! Orders will not be shipped between 18 Dec & 4 January!

Sikatite PUD Plus 15L Pail

182753
  • Sale
  • $210


SikaTite-PUD Plus is a one-component, water-based polyurethane modified waterproofing membrane in grey. 

Technical Data

Flexible, water-based polyurethane modified, waterproofing membrane

Description
SikaTite-PUD Plus is a one-component, water-based polyurethane modified waterproofing membrane. Uses SikaTite-PUD Plus is suitable for applications to most common building substrates including concrete, fibre cement, plasterboard, gyprock, render, and render brickwork. SikaTite-PUD Plus is suitable for waterproofing of: „ Decks „ Balconies „ Roofs
Advantages „
UV Stable „ Fast drying „ Can be recoated after 1-2 hours @ 20ºC depending on amount of coats ement based tile adhesives can be applied over SikaTite-PUD d „ applied and substrate „ Can be used for internal and external waterproofing applications „ Sika c Plus „ No reinforcement require „ Easy to clean in water „ Approved in accordance with AS4858:2004 “Wet Area Membranes”.

Storage and Shelf Life e when stored in opened original containers in a cool, dry place. Approximately twelve (12) months from date of manufacture

Instructions for Use
Surface Preparation
All new concrete surfaces must be allowed to cure for at least 6 weeks and have a wood float finish. Steel trowel finished slabs must be mechanically abraded prior to commencing waterproofing.

All rendered surfaces must be allowed to cure for at least 7 days prior to commencing waterproofing. Ensure all ren finish. Ensure all metal surfaces are rust free. Small hairline cracks may be filled with the first application of SikaTite-PUD Plus. Cracks larger than 2 mm or structural shrinkage cracks must b filled with a Sikaflex 11FC or Sikaflex Pro, and then a 50 mm wide polypropylene/ polyethylene tape placed over the crack prior to the application of SikaTite-PUD Plus

Fibre Cement sheet when used as an underlay or wall / floor material must be a minimum of 6 mm in thickness. All FC Sheets should be fixed in accordance with the manufacturer’s instructions and the relevant standards.

Compressed Fibre-Cement sheets when used as a floor substrate must be 15 mm thick, and when used a wall substrate must 9 mm thick and must be installed in accordance with the manufacturer’s instructions and the releva standards.

Gypsum–plasterboard sheets when used as a wall substrate must be a minimum of 10 mm thick, and installed in instructions and the relevant standards.

Priming
Approximately 5-10 minutes at 20ºC prior to • Ensure all surfaces are sound, dry and free from excessive movement, oil, dust, grease, wax, curing compounds, release agents, paint and any other loose contaminating materials. Also remove any protrusions from the surface that may pierce the membrane. • All surfaces must be primed with SikaTite-Primer prior to the application of SikaTite-PUD Plus to the substrate. Except for metal surfaces which should be primed with a Zinc Chromate / etching primer. When applying the SikaTite-Primer it is recommended to firstly pour some primer in a section then spread the primer using a broom, brush or roller. Then continue this method of application until the entire area is primed. Note: This method of application ensures a thorough coat of the primer on the surface. Allow the primer to dry for a commencing waterproofing